Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

 

This method creates and automatically starts an import process for the contacts listed in the xmlDoc parameter. You can use this method instead of calling a sequence of NewImportProcess and StartProcess methods. StartImportProcesses can also be used to update fields of an existing contact. 

...

Parameter 

listsIDs
string 

Mandatory - List identifiers. You can include multiple list IDs, separated by semicolons.
(See "Lists and Groups" section below for more information and examples.)

Example:  1;2;3

listsGUIDs
string 

Mandatory - List GUIDs. You can include multiple list GUIDs, separated by semicolons.
(See "Lists and Groups" section below for more information and examples.)

Example:  abc-123-def-456;ghi-789-jkl-123;mno-456-pqr-789

xmlDoc
string 

When specified: An XML string containing the recipients to be imported to the specified lists and groups. In this case the method Does not import any pending lists that were previously submitted using NewImportProccess

If not specified (NULL): method sequentially imports all pending XML structures that have been previously submitted using NewImportProccess. This option is available only starting from MailUp 8.2.1 or higher

See "Best Practices" and "XML Structure" sections below for known restrictions, more information and examples.

groupsIDs
string 

Mandatory - Group identifiers for each list, separated by semicolons. You can specify multiple groups for each list as well, separated by commas.
(See "Lists and Groups" section below for more information and examples.)

Example:  22,23;24;25

importType
integer 

Mandatory - Import type.

 

Any empty field is ignored if importType is equal to 1,2 or 3

  • 1 = import occur only on email channel (mobile number, if present, is discarded)
  • 2 = subscriptions occur only on SMS channel (email address, if present, is discarded)
  • 3 = subscriptions occur on both email and SMS channels (no field is discarded)

 

Any empty field overwrites the value on MailUp if importType is equal to 4, 5 or 6

  • 4 = import occur only on email channel (mobile number, if present, is discarded)
  • 5 = subscriptions occur only on SMS channel (email address, if present, is discarded)
  • 6 = subscriptions occur on both email and SMS channels (no field is discarded)


mobileInputType
integer 

Mandatory - Mobile number input type.

  • 1 = Entire number in a single field
  • 2 = Prefix and Number separated into different fields

(See "XML Structure" section below for more information and examples.)

asPending
boolean 
Mandatory - If "true" it subscribes (or unsubscribes, if "asOptOut=true") also the recipients that were pending in specified MailUp list before import. Please note that the name of this parameter is misleading, see table in Best Practices for details
(Default = false) 
ConfirmEmail
boolean 

Mandatory - If "true" sets subscription status of specified recipients as "pending" and sends them a confirmation email. Status change to "pending" and email sending applies to either brand new recipients or to recipients that were already subscribed or pending to the specified list before import. See table in Best Practices for details.
(Default = false) 

asOptOut
boolean 
Mandatory - Imports recipients as "unsubscribed" when set to "true", regardless if they were previously subscribed into specified MailUp list. If you want to cancel subscription (i.e. unsubscribe) also for the recipients that were previously pending, you should set both "asOptOut=true" and "asPending=true". See table in Best Practices for details.
(Default = false) 
forceOptIn
boolean 
Mandatory - If "true" itenables change of subscription status even if a recipient was "unsubscribed" before import. It can be used to force "subscribed" or "pending" status for previously unsubscribed recipients, please note that this status change does not apply when recipient was automatically unsubscribed due to hard bounce or complaints feedback loop. See table in Best Practices for details. 
(Default = false) 
replaceGroups
boolean 
Mandatory - Replace existing groups when set to "true". The system will automatically remove previously subscribed groups and keep only the groups specified in the groupsIDs parameter.
(Default = false) 
Note

The following table shows the most common combinations for the parameters that manage subscription status of imported recipients that are already present on MailUp

Action required on already existing recipientsConfirmEmailAsOptoutAsPendingForceOptIn 
No changes on subscription statusFalseFalseFalseFalseDefault case
Pending become Subscribed FalseFalseTrueFalseBad practice, please take care with itIt's a bad practice to force subscription of pending recipients at import time, the recommended
practice with double optin is that you import as pending and you let MailUp do this status change
when recipient actually clicks on the confirmation link.
Unsubscribed become SubscribedFalseFalseFalseTrueExcept for recipients that were unsubscribed due to hard bounce
or complaints feedback loop
Subscribed become PendingTrueFalseFalseFalseWith this configuration the confirmation email is sent to both
previously subscribed and previously pending
Unsubscribed become PendingTrueFalseAnyTrueExcept for recipients that were unsubscribed due to hard bounce
or complaints feedback loop
Despite of its name, "AsPending" value is ignored here.
Subscribed become UnsubscribedFalseTrueFalseFalse 
Pending become UnsubscribedFalseTrueTrueFalse 


Tip
titleBest practices
  1. Method call fails when another import process is running. You can use GetProcessDetails method to check if a previously started process is still running; while an alternative solution consist of periodically retry the method call until it returns

    ReturnCode=0

  2. Method response contains either a global ReturnCode or a specific ReturnCode for each import process that has been started by this method. Call is successful only when all ReturnCodes are equal to "0"

  3. There is not a known size limit for xmlDoc field: it has been successfully tested with 1.2 million characters (in this case return value is quite immediate but the whole import process could take several minutes and other import requests will be denied during this period)

  4. When using cloud services it can happen that your application must respect a size limit in API calls that is lower than the size of the XML that you would pass as xmlDoc parameter. In this case you can split your import data, call several times

    NewImportProccess

    NewImportProcess with smaller recipient lists and then use StartImportProcesses (with empty xmlDoc parameter) to sequentially start all previously created import processes. This behavior requires

    MailUp 8.2.1 or higher

    MailUp 8.2.1 or higher. Please note that, when combining one or more calls to NewImportProcess and a final call to StartImportProcesses , the parameters of StartImportProcesses do not overwrite the import settings that were specified by each NewImportProcess request

  5. With ConfirmEmail=true, MailUp automatically selects the confirmation request message (you can customize it on Settings > List Settings > Notifications > Confirmation request) and it creates a queue of recipients that will receive that message. Please note that queue creation takes a while (even a couple of minutes if you have 1M recipients to be imported and notified) and queued message is made "ready for immediate sending" but it IS NOT automatically sent to the recipients. To send a queued message you can use StartDelivery method. You could also use  GetNewsletterQueues before calling StartDelivery in order to double check if queuing in "ImmediateSendingQueue" is completed.

Lists and Groups

You must specify either listIDs or listsGUIDs parameters. If you specify both fields, then the number of items in each parameter must match, and you must use semicolons to delineate empty values. We've provided examples below to help with understanding how to work with these parameters.

...

Code Block
languagehtml/xml
linenumberstrue
<ws:listsIDs>1;2</ws:listsIDs>
<ws:listsGUIDs>66af9900-7dd7-4cca-9125-beadaf3a3a59;0e591119-xxxx-yyyy-zzzz-6ac75384b564</ws:listsGUIDs>
<ws:groupsIDs>;</ws:groupsIDs>
 Add recipients to multiple lists (one group per list)

In this example values are provided for both listsIDs and  listsGUIDs parameters (mandatory fields). Each of the parameters must have the same number of elements (separated by semi-colons). In this case, we are also specifying group 22 for list 1, and group 13 for list 2.

Code Block
languagehtml/xml
linenumberstrue
<ws:listsIDs>1;2</ws:listsIDs>
<ws:listsGUIDs>66af9900-7dd7-4cca-9125-beadaf3a3a59;0e591119-xxxx-yyyy-zzzz-6ac75384b564</ws:listsGUIDs>
<ws:groupsIDs>22;13</ws:groupsIDs>

...

The XML structure for each recipient needs to be consistent for all subscribers, and include empty tags for required values that are empty. When specifying the phone number for a recipient, the structure of your XML must match the mobileInputType parameter, where either the entire phone number is represented in a single attribute, or the prefix and number are represented in separate attributes. 

For example, if the mobileInputType parameter is set to 1,use the following XML structure:

Code Block
languagehtml/xml
<!--Option 1: number and prefix in a single field (use mobileInputType=1)-->
<subscriber email="user@myprovider.com" Prefix="" Number="+0018889624587" Name="">

If the mobileInputType parameter is set to 2, use the following XML structure:

Code Block
languagehtml/xml
<!--Option 2: number and prefix in separate fields (use mobileInputType=2)-->
<subscriber email="user@myprovider.com" Prefix="+001" Number="8889624587" Name="">


In case you also need to specify personal data fields an example is provided below 

Note
  • Personal data fields shall be specified in progressive order and you shall also include empty fields. It is also recommended to use the same data structure (i.e. the same number of fields for each record, even if some fields are empty) for all subscribers. In case of update of an existing subscriber, the empty fields are handled as "don't change this field" when you specify 1, 2 or 3 as ImportType.
  • Do not exceed 50 characters for "email" field and 100 characters for "campo" fields (up to 200 characters are allowed if you use only 7-bit ASCII strings)
  • If you want to update an existing subscriber and clear one or more of its fields you shall use import type with value 4, 5, or 6; in this case any empty field in xmlDoc parameter resets the correspondent field on MailUp console account.
Code Block
languagehtml/xml
linenumberstrue
<subscribers>
  <subscriber email="mike@example.com" Prefix="" Number="" Name="">
    <campo1>Mike</campo1>
    <campo2>Brown</campo2>
    <campo3>Example Company</campo3>
    <campo4>Los Angeles</campo4>
    <campo5> </campo5>
    <campo6>90125</campo6>
    <campo7>CA</campo7>
    <campo8>US</campo8>
    <campo9>555 Some Street</campo9>
    <campo10></campo10>
    <campo11>555-123-1234</campo11>
  </subscriber> 
  <!-- repeat for each recipient to import -->
</subscribers>

You can use 0 and 1 in place of true and false for boolean parameter values.

 

Note
titleUnsupported characters in subscribers fields

All field values are handled as strings, character '|' (pipe) is not allowed and may lead to "-402" error codes

 

...

Code Block
languagephp
linenumberstrue
<?php

class MailUpWsImport {
  protected $ns = "http://ws.mailupnet.it/";
  //replace <console host name> with the host name of your console
  protected $WSDLUrl = "http://<console host name>/services/WSMailUpImport.asmx?WSDL";
  protected $headers = array("User" => "user", "Password" => "password");
  protected $rCode;
  private $soapClient;
  private $xmlResponse;
  protected $domResult;

  function __construct() {
    $this->header = new SOAPHeader($this->ns, "Authentication", $this->headers);
    $this->soapClient = new SoapClient($this->WSDLUrl,array("trace"      => 1,"exceptions" => 0));
    $this->soapClient->__setSoapHeaders($this->header);
  }

  function __destruct() {
    unset($this->soapClient); 
  }

  //...
	
  public function startImportProcesses($processData) {
    try {
      echo $processData."<br/><br/>";
      $this->soapClient->StartImportProcesses($processData);
    } catch (SoapFault $soapFault) {
      var_dump($soapFault);
    }
  }

  //...
	
}

$WsImport = new MailUpWsImport();
$xmlData = <<<EOT
<subscribers><subscriber email="test@example.com" Prefix="+39" Number="3351234567" Name="Test">
<campo1>Luigi</campo1><campo2>Rossi</campo2><campo3>Rossi consulting</campo3><campo4>Parma2</campo4><campo5>PR</campo5>
<campo6>43102</campo6><campo7></campo7><campo8>ITA</campo8><campo9>Via Garibaldi, 1</campo9><campo10>0521123456</campo10>
<campo11>0521123457</campo11></subscriber></subscribers>
EOT;

$startImportProcessData = array(
  "listsIDs" => "4",
  "listsGUIDs" => "3c5cb08c-f0b5-4bd6-9c2a-b687ecdac8b4",
  "xmlDoc" => $xmlData,
  "groupsIDs" => "22",
  "importType" => "3",
  "mobileInputType" => "2",
  "asPending" => '0',
  "ConfirmEmail" => "0",
  "asOptOut" => "0",
  "forceOptIn" => "0",
  "replaceGroups" => "0"
);
 
$WsImport->startImportProcesses($startImportProcessData);

?>

 

C#

Code Block
languagecsharp
WSMailUpImport toTest = new WSMailUpImport();

Authentication auth = new Authentication();
auth.User = tbLoginUserImport.Text;
auth.Password = tbLoginPasswordImport.Text;
auth.encType = string.Empty;

toTest.AuthenticationValue = auth;

string xmlString = "<subscribers><subscriber email=\"mike@example.com\" Prefix=\"\" Number=\"\" Name=\"\"><campo1>Mike</campo1><campo2>Brown</campo2><campo3>Example Company</campo3><campo4>Los Angeles</campo4><campo5></campo5><campo6>90125</campo6><campo7>CA</campo7><campo8>US</campo8><campo9>555 Some Street</campo9><campo10></campo10><campo11>555-123-1234</campo11></subscriber></subscribers>";

string myListId = "8";
string myListGuid = "CC9C4CBD-567B-4248-B56F-7C8364F11C5";
string myGroupsIDs = "45";
int importType = 3;
int mobileInputType = 2;
bool asPending =  false;
bool ConfirmEmail =  false;
bool asOptOut =  false;
bool forceOptIn =  false;
bool replaceGroups =  false;
string retVal = toTest.StartImportProcesses(myListId ,myListGuid, xmlString, myGroupsIDs, importType, mobileInputType, asPending , ConfirmEmail, asOptOut, forceOptIn, replaceGroups);

...