Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 47 Next »

Introduction

Liquid is an open-source template language created by Shopify and written in Ruby. It is the backbone of Shopify themes and is used to load dynamic content on storefronts.

In MailUp Liquid is used as markup language for the email messages that use the Advanced content personalization.

The following guide describes how to use Liquid within MailUp and which statements are supported.

 

When talking about dynamics fields, we refer to the MailUp Recipient fields.

Basics

Operators

OperatorMeaningWorkSyntax
==equals(tick)

This operator can be used with dynamic fields 'as is' only to compare strings.

{% if dynamicfields.name == 'alan' %} 
alan
{% elsif dynamicfields.name == 'tom' %}
tom
{% else %}
catherine
{% endif %}

In this case the check is case sensitive.

To compare numbers or data type different from string it is possible use the built in functions:

{% assign c1 = dynamicfields.name| evaltext: 'equalTo', 'Jennifer' %} {% if c1 == true %} Text {% endif %}
{% assign c1 = dynamicfields.age | evalinteger: 'equalTo', '8' %} {% if c1 == true %} Text {% endif %}
!=does not equal(tick)

It is possible use this operator with dynamic fields 'as is' only to compare strings.

{% if dynamicfields.name != 'alan' %} 
alan
{% elsif dynamicfields.name != 'tom' %}
tom
{% else %}
catherine
{% endif %}

In this case the check is case sensitive.

To compare numbers or data type different from string it is possible use the built in functions:

{% assign c1 = dynamicfields.name| evaltext: 'otherThan', 'Jennifer' %} {% if c1 == true %} Text {% endif %}
{% assign c1 = dynamicfields.age | evalinteger: 'otherThan', '8' %} {% if c1 == true %} Text {% endif %}
>greater than(tick)

It is possible use this operator with dynamic fields 'as is' only to compare strings.

{% if dynamicfields.name > 'alan' %} 
alan
{% elsif dynamicfields.name > 'tom' %}
tom
{% else %}
catherine
{% endif %}

In this case the check is case sensitive.

To compare numbers or data type different from string it is possible use the built in functions:

{% assign c1 = dynamicfields.name| evaltext: 'moreThan', 'Jennifer' %} {% if c1 == true %} Text {% endif %}
{% assign c1 = dynamicfields.age | evalinteger: 'moreThan', '8' %} {% if c1 == true %} Text {% endif %}
<less than(tick)

It is possible use this operator with dynamic fields 'as is' only to compare strings.

{% if dynamicfields.name < 'alan' %} 
alan
{% elsif dynamicfields.name < 'tom' %}
tom
{% else %}
catherine
{% endif %}

In this case the check is case sensitive.

To compare numbers or data type different from string it is possible use the built in functions:

{% assign c1 = dynamicfields.name| evaltext: 'lessThan', 'Jennifer' %} {% if c1 == true %} Text {% endif %}
{% assign c1 = dynamicfields.age | evalinteger: 'lessThan', '8' %} {% if c1 == true %} Text {% endif %}
>=greater than or equal to(tick)

It is possible use this operator with dynamic fields 'as is' only to compare strings.

{% if dynamicfields.name >= 'alan' %} 
alan
{% elsif dynamicfields.name >= 'tom' %}
tom
{% else %}
catherine
{% endif %}

In this case the check is case sensitive.

To compare numbers or data type different from string it is possible use the built in functions:

{% assign c1 = dynamicfields.name| evaltext: 'equalOrMoreThan', 'Jennifer' %} {% if c1 == true %} Text {% endif %}
{% assign c1 = dynamicfields.age | evalinteger: 'equalOrMoreThan', '8' %} {% if c1 == true %} Text {% endif %}
<=less than or equal to(tick)

It is possible use this operator with dynamic fields 'as is' only to compare strings.

{% if dynamicfields.name <= 'alan' %} 
alan
{% elsif dynamicfields.name <= 'tom' %}
tom
{% else %}
catherine
{% endif %}

In this case the check is case sensitive.

To compare numbers or data type different from string it is possible use the built in functions:

{% assign c1 = dynamicfields.name| evaltext: 'equalOrLessThan', 'Jennifer' %} {% if c1 == true %} Text {% endif %}
{% assign c1 = dynamicfields.age | evalinteger: 'equalOrLessThan', '8' %} {% if c1 == true %} Text {% endif %}
orlogical or(tick)
{% if dynamicfields.name == 'alan' or dynamicfields.age == 'child' %} 
is alan or a child
{% else %}
It is an adult alan or another adult
{% endif %}
andlogical and(tick)
{% if dynamicfields.name == 'alan' and dynamicfields.age == 'child' %} 
alan is a child
{% else %}
it is an adult
{% endif %}
containschecks for the presence of a substring inside a string(tick)
{% if dynamicfields.name contains 'oof' %} 
could be alan? 
{% else %} 
surely isn't alan 
{% endif %}

Types

TypeMeaningWorkSyntax
StringDeclare a string by wrapping a variable’s value in single quotes:(tick)
Input
{% assign thisIsAString = 'this is a string' %}
{{ thisIsAString | upcase }} 
Output
THIS IS A STRING
NumberNumbers include floats and integers:(tick)
Input
{% assign thisIsAnInteger = 10 %}
{{ thisIsAnInteger | minus: 2 }} 
Output
8

 

 

Input
{% assign thisIsAFloat = 10.234 %}
{{ thisIsAFloat  | minus: 2 }} 
Output
8.23400020599365
Boolean (tick)
Input
{% assign thisIsTrue = true %}
{{ thisIsTrue }}
Output
true

 

 

Input
{% assign thisIsFalse = true %}
{{ thisIsFalse }}
Output
false
Nil

Nil is a special empty value that is returned when Liquid code has no results. It is not a string with the characters “nil”.

Nil is treated as false in the conditions of if blocks and other Liquid tags that check the truthfulness of a statement.

(tick)
Input
{% if user %}
  Hello user!
{% endif %}
Output
 Hello user!

 

 

Input
{% unless user %}
  Hello user!
{% endunless %}
Output
 Hello user!
ArrayArrays hold lists of variables of any type.(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{{ my_array.first }}
{{ my_array.last }}
Output
alan
mark

 

 

Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array %}
 {{ user }}
{% endfor %}
Output
alan catherine tom erin mark

 

 

Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{{ my_array[2] }}
Output
tom

 

TAGS

Comment

OperatorMeaningWorkSyntax
commentAny text within the opening and closing comment blocks will not be output, and any Liquid code within will not be executed(tick)

  

Input
Text 1 {% comment %} Text 2 {% endcomment %}

 

Output
Text 1

 

Control flow

OperatorMeaningWorkSyntax
if

Executes a block of code only if a certain condition is true

(tick)
Input
{% assign c1 = dynamicfields.age| evalinteger: 'equalTo', '10' %} 
{% if c1 == true %} 
10 years old 
{% endif %}
Output
10 years old 

 

 

Input
{% if dynamicfields.name == 'alan' %} 
alan
{% endif %}
Output
alan 
unlessExecutes a block of code only if a certain condition is not match(tick)
Input
{% assign c1 = dynamicfields.age| evalinteger: 'equalTo', '10' %} 
{% unless c1 == true %} 
Not 10 years old
{% endunless %}
Output
Not 10 years old

 

 

Input
{% unless dynamicfields.name == 'alan' %} 
alan
{% endunless %}
Output
alan 
elsif/elseAdds more conditions within an if or unless block.(tick)
Input
{% if dynamicfields.name == 'alan' %} 
alan
{% elsif dynamicfields.name == 'tom' %}
tom
{% else %}
catherine
{% endif %}
output if name is goofy
alan
output if name is tom
tom
output for each other name
catherine
case/whenCreates a switch statement to compare a variable with different values(tick)
Input
{% case dynamicfields.name%}
  {% when 'alan' %}
     This is a alan
  {% when 'tom' %}
     This is a tom
  {% else %}
     This is not a alan nor a tom. can it be a catherine?
{% endcase %} 
output if name is goofy
This is a alan
output if name is mickey
This is a tom
output for each other name
This is not a alan nor a tom. can it be a catherine?

Iteration

For

OperatorMeaningWorkSyntax

for

Repeatedly executes a block of code.

(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array %}
 {{ user }}
{% endfor %}
Output
alan catherine tom erin mark
break

Causes the loop to stop iterating when it encounters the break tag.

(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array %}
 {% if user == 'erin' %}
    {% break %}
  {% else %}
    {{ user }}
  {% endif %}
{% endfor %}
Output
alan catherine tom
continue

Causes the loop to skip the current iteration when it encounters the continue tag.

(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array %}
 {% if user == 'erin' %}
    {% continue %}
  {% else %}
    {{ user }}
  {% endif %}
{% endfor %}
Output
alan catherine tom mark
limitLimits the loop to the specified number of iterations.(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array limit:2 %}
 {{ user }}
{% endfor %}
Output
alan catherine
offsetBegins the loop at the specified index.(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array offset:2 %}
 {{ user }}
{% endfor %}
Output
tom erin mark

range

Defines a range of numbers to loop through. The range can be defined by both literal and variable numbers.(tick)
Input
{% for i in (3..5) %}
  {{ i }}
{% endfor %}
Output
3 4 5

 

 

Input
{% assign num = 4 %}
{% for i in (1..num) %}
  {{ i }}
{% endfor %}
Output
1 2 3 4
reversedReverses the order of the loop.(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array reversed %}
 {{ user }}
{% endfor %}
Output
mark erin tom catherine alan 

Cycle

OperatorMeaningWorkSyntax

Cycle

Repeatedly executes a block of code.

(tick)
Input
{% assign my_array = 'alan,catherine,tom,erin,mark' | split: ',' %}
{% for user in my_array %}
 {% cycle 'first one', 'second one', 'third one' %} 
{% endfor %}
Output
first one second one third one first one second one


Variable

OperatorMeaningWorkSyntax
assign

Creates a new variable

(tick)
Input
{% assign c1 = 10 %}
{% if c1 == 10 %} 
    It is ten!
{% endif %}
Output
It is ten!

 

 

Input
{% assign c1 = 'alan' %}
{% if c1 == 'alan' %} 
   It is alan!
{% endif %}
Output
It is alan!
captureCaptures the string inside of the opening and closing tags and assigns it to a variable. Variables created through {% capture %} are strings.(tick)
Input
{% assign name = dynamicfields.name %}
{% assign surname = dynamicfields.surname %}

{% capture about_me %}
I am {{ name }} {{ surname }} and my favorite food is pizza.
{% endcapture %}

{{ about_me }}
output
I am Catherine Martin and my favorite food is pizza.
incrementCreates a new number variable, and increases its value by one every time it is called. The initial value is 0.(error) 
decrementCreates a new number variable, and decreases its value by one every time it is called. The initial value is -1.(error) 

Filters

 

OperatorMeaningWorkSyntax
abs

Returns the absolute value of a number.

(error) 
append

Concatenates two strings and returns the concatenated value.

(tick)
Input
{{ "Hello " | append: "Carl" }}
Output
Hello Carl

 

 

Input
{{ "Welcome" | append: dynamicfields.name }}
Output
Welcome Luke 



Input
{{ dynamicfields.name | append: " welcome!"}}
Output
Luke welcome!
at_least

Limits a number to a minimum value.

(error) 
at_most

Limits a number to a maximum value.

(error) 
capitalize

Makes the first character of a string capitalized.

(tick)
Input
{{ "my great title" | capitalize }}
Output
My great title

 

 

Input
{{ dynamicfields.nome | capitalize }}
Output
Luke
ceil

Rounds the input up to the nearest whole number. Liquid tries to convert the input to a number before the filter is applied.

(error) 
compact

Removes any nil values from an array.

  
concat

Concatenates (joins together) multiple arrays. The resulting array contains all the items from the input arrays.

(error) 
dateConverts a timestamp into another date format. The format for this syntax is the same as strftime. The input uses the same format as Ruby’s Time.parse.  
defaultAllows you to specify a fallback in case a value doesn’t exist. defaultwill show its value if the left side is nilfalse, or empty.(error) 
divided_by

Divides a number by the specified number.

(warning)

Does not work on dynamicfields.

 

Input
{{ 16 | divided_by: 4 }}
Output
4

 

 

Input
{{ subTotal| divided_by: 4 }}
Output
100
downcase

Makes each character in a string lowercase. It has no effect on strings which are already all lowercase.

(tick)
Input
{{ "Parker Moore" | downcase }}
Output
parker moore

 

 

Input
{{ dynamicfields.nome | downcase}}
Output
luke
escape

Escapes a string by replacing characters with escape sequences (so that the string can be used in a URL, for example). It doesn’t change strings that don’t have anything to escape.

(error) 
escape_once

Escapes a string without changing existing escaped entities. It doesn’t change strings that don’t have anything to escape.

(error) 
first

Returns the first item of an array.

 

Assuming the userid dynamic field contains "1,2,3,4,5".

Input
{% assign my_array = dynamicfields.userid | split: "," %}
{{ my_array.first }}
Output

 

 

Input
{% assign my_array = "apples, oranges, peaches, plums" | split: ", " %}
{{ my_array.first }}
Output
apples
floor

Rounds a number down to the nearest whole number. Liquid tries to convert the input to a number before the filter is applied.

(error)

 

join

Combines the items in an array into a single string using the argument as a separator.

(tick)

Assuming the userid dynamic field contains "1,2,3,4,5".

 

Input
{% assign my_array = dynamicfields.userid | split: "," %}
{{ my_array | join: " and " }} 
Output
1 and 2 and 3 and 4 and 5

 

 

Input
{% assign beatles = "John, Paul, George, Ringo" | split: ", " %}
{{ beatles | join: " and " }} 
Output
John and Paul and George and Ringo
last

Returns the last item of an array.

(tick)

Assuming the userid dynamic field contains "1,2,3,4,5".

Input
{% assign my_array = dynamicfields.userid | split: "," %}
{{ my_array.last}}
Output
5

 

 

Input
{% assign my_array = "apples, oranges, peaches, plums" | split: ", " %}

{{ my_array.last }}
Output
plums
lstrip

Removes all whitespaces (tabs, spaces, and newlines) from the beginning of a string. The filter does not affect spaces between words.

(error) 
map

Creates an array of values by extracting the values of a named property from another object.

(tick)

Assuming the products contains:


{
	"products": [{
		"title": "Product 1",
		"price": 100
	}, {
		"title": "Product 2",
		"price": 200
	}, {
		"title": "Product 3",
		"price": 300
	}]
}


 

Input
{% assign all_titles = products | map: "title" %}

{% for item in all_titles %}
{{ item }}
{% endfor %}
Output
Product 1
Product 2
Product 3
minus

Subtracts a number from another number.

(warning)

Does not work on dynamicfields.

Input
{{ 4 | minus: 2 }}
Output
2

 

 

Input
{{ SubTotal | minus: 100 }}
Output
900
modulo

Returns the remainder of a division operation.

(warning)

Does not work on dynamicfields.

 

Input
{{ 3 | modulo: 2 }}
Output
1

 

 

Input
{{ SubTotal | modulo: 6}}
Output
4
newline_to_br

Replaces every newline (\n) with an HTML line break (<br>).

(error) 
plus

Adds a number to another number.

(tick)

Assuming the TotalIncome dynamic field contains 500.

Input
{{ dynamicfields.TotalIncome| plus: 2 }}
Output
502

 

 

Input
{{ 5| plus: 2 }}
7
prepend

Adds the specified string to the beginning of another string.

(tick)
Input
{{ "apples, oranges, and bananas" | prepend: "Some fruit: " }}
Output
Some fruit: apples, oranges, and bananas

 

 

Input
{{ dynamicfields.Name| prepend: "Hello " }}
Output
Hello Luke

 

 

 

Input
{{ dynamicfields.Name| prepend: dynamicfields.Surname}}
Output
Luke Skywalker

 

 

 

Input
{{ "Welcome" | prepend: dynamicfields.Name }}
Output
Welcome Luke
remove

Removes every occurrence of the specified substring from a string.

(tick)
Input
{{ "I strained to see the train through the rain" | remove: "rain" }}
Output
I sted to see the t through the 

 

 

 

Input
{{ dynamicfields.Name| remove: "uk"}}
Output
Le

 

 

Input
{{"Luke Skywalker" | remove: dynamicfields.Name}}
Output
Skywalker
remove_first

Removes only the first occurrence of the specified substring from a string.

(tick)
Input
{{ "I strained to see the train through the rain" | remove_first: "rain" }}
Output
I sted to see the train through the rain
replace

Replaces every occurrence of an argument in a string with the second argument.

(tick)
Input
{{ "Take my protein pills and put my helmet on" | replace: "my", "your" }}
Output
Take your protein pills and put your helmet on
replace_first

Replaces only the first occurrence of the first argument in a string with the second argument.

(tick)
Input
{% assign my_string = "Take my protein pills and put my helmet on" %}
{{ my_string | replace_first: "my", "your" }}
Output
Take your protein pills and put my helmet on
reverse

Reverses the order of the items in an array. reverse cannot reverse a string.

(error) 
round

Rounds an input number to the nearest integer or, if a number is specified as an argument, to that number of decimal places.

(tick)

Does not work on dynamicfields.


 

Input
{{ 1.2 | round }}
Output
1
rstrip

Removes all whitespace (tabs, spaces, and newlines) from the right side of a string.

(error) 
size

Returns the number of characters in a string or the number of items in an array. size can also be used with dot notation (for example, {{ my_string.size }}). This allows you to use size inside tags such as conditionals.

(tick)
Input
{{ "Ground control to Major Tom." | size }}
Output
28

 

 

Input
{% assign my_array = "apples, oranges, peaches, plums" | split: ", " %}

{{ my_array | size }}
Output
4
slice

Returns a substring of 1 character beginning at the index specified by the argument passed in. An optional second argument specifies the length of the substring to be returned.

String indices are numbered starting from 0.

(tick)
Input
{{ "Liquid" | slice: 0 }}
Output
L

 

 

Assuming title contains "Return to the future"

Input
{{title | slice: 0}}
Output
R

 

 

Input
{{ dynamicfields.title| slice: 0 }}
Outuput
R
sort

Sorts items in an array by a property of an item in the array. The order of the sorted array is case-sensitive.

(warning)

Same behaviour of the sort_natural filter.

 

Input
{% assign my_array = "zebra, octopus, giraffe, Sally Snake" | split: ", " %}

{{ my_array | sort_natural | join: ", " }}
Output
giraffe, octopus, Sally Snake, zebra
sort_naturalSorts items in an array by a property of an item in the array.(error) 
splitDivides an input string into an array using the argument as a separator. split is commonly used to convert comma-separated items from a string to an array.(tick)
Input
{% assign beatles = "John, Paul, George, Ringo" | split: ", " %}
{% for member in beatles %}
{{ member }}
{% endfor %}
Output
John

Paul

George

Ringo

 

Assuming the dynamic field albumid contains "1,2,3,4,5"

Input
{% assign ids= dynamicfields.albumid | split: "," %}
{% for id in ids%}
{{ id }}
{% endfor %}
Output
1
2
3
4
5
strip

Removes all whitespace (tabs, spaces, and newlines) from both the left and right side of a string. It does not affect spaces between words.

(error) 
strip_html

Removes any HTML tags from a string.

(tick)
Input
{{ "Have <em>you</em> read <strong>Ulysses</strong>?" | strip_html }}
Output
Have you read Ulysses?
strip_newlines

Removes any newline characters (line breaks) from a string.

(error) 
times

Multiplies a number by another number.

(warning)

Does not work on dynamicfields.

 

Input
{{ 24 | times: 7 }}
Output
168
truncate

truncate shortens a string down to the number of characters passed as a parameter. If the number of characters specified is less than the length of the string, an ellipsis (…) is appended to the string and is included in the character count.

(tick)
Input
{{ "Ground control to Major Tom." | truncate: 20 }}
Output
Ground control to...

 

 

Input
{{ "Ground control to Major Tom." | truncate: 25, ", and so on" }}
Output
Ground control, and so on
truncatewords

Shortens a string down to the number of words passed as the argument. If the specified number of words is less than the number of words in the string, an ellipsis (…) is appended to the string.

(error) 
uniq

Removes any duplicate elements in an array.

(error) 
upcase

Makes each character in a string uppercase. It has no effect on strings which are already all uppercase.

(tick)
Input
{{ dynamicfields.name | upcase }}

Output
LUKE
url_decode

Decodes a string that has been encoded as a URL or by url_encode.

(error) 
url_encode

Converts any URL-unsafe characters in a string into percent-encoded characters.

(error) 

 

 
  • No labels